7
English
APPLICATION
This line laser generates visible laser beam allowing to make the following
measurements: Height measurement, calibration of horizontal and vertical
planes, right angles, vertical position of installations, etc. The line laser is
used for indoor performance to set zero marks, for marking out of bracing,
installation of tingles, panel guides, tiling, etc. Laser device is often used
for marking out in the process of furniture, shelf or mirror installation, etc.
Laser device may be used for outdoor performance at distance within its
operation range.
PRODUCT LIFE
Product life of the tool is 7 years. The battery and the tool should never
be placed in municipal waste. Date of production, manufacturer’s contact
information, country of origin are indicated on the product sticker.
CARE AND CLEANING
Please handle line laser with care. Clean with soft cloth only after any use.
If necessary damp cloth with some water. If instrument is wet clean and
dry it carefully. Pack it up only if it is perfectly dry. Transport in original con-
tainer/case only. Note: During transport On/Off compensator lock (5) must
be set to position “OFF”. Disregard may lead to damage of compensator.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After line laser has been dropped or hit. Please check the accuracy;
• Large fluctuation of temperature: if instrument will beused in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
