ADA ZHT 100-70
Instructions for use
Timber and building material moisture meter /
outdoor air temperature
Appearance
1. Protective cover
2. Measuring electrodes
3. Display
4. Record button
5. Turn on backlight
6. Selecting the temperature unit
7. Operating mode button (MODE)
8. MAX/MIN humidity value button
Display
1. Graphic display of the humidity level.
2. automatic switch-off
3. Ambient air temperature value
Temperature unit display (ºC/ºF) 4.
5. Low battery indicator
6. Data scanning and holding functions
7. Max/Min function
8. Humidity measurement unit
9. Humidity level value
10. Type of material
Features
Suitable for measuring wood, dry plaster, cardboard, plaster, cement, etc.
Backlit display
Interchangeable measuring electrodes
Simultaneous measurement of humidity and ambient temperature
Display of humidity and ambient temperature values
Display of maximum and minimum values
Data hold function
Wet bulb temperature measurement
Automatic switch-off function
Installing the battery
Remove the battery cover and insert the 9V battery into the battery compartment.
Press button (4) to switch on the device. Select the desired measuring mode according to the material to be
measured.
See the material table at the end of the manual.
Remove the cover from the electrodes. Dip the electrodes into the material as deeply as possible. Be careful not to
break the electrodes.
Be careful not to break the electrodes. Take several measurements in different places to get more accurate results
The moisture content. The measured values are indicated on the display.
