© Adam Equipment Company 2014
10
•
If a container is used, place the empty container on the pan before
entering parts counting mode then press
[Tare]
key to remove the
weight of the empty container. Then press
[Func]
key to go to parts
counting mode and select the preset sample piece value and add the
items to the container as selected and press
[Zero]
key.
•
Press
[Func]
to exit and go back to the normal weighing mode.
5.4.2 PERCENTAGE WEIGHING
•
In the weighing mode, press
[Func]
key
twice to access the percentage
weighing mode, the display will show
“PER”.
•
Press
[Zero]
key to set the reference sample value, the display will
show
“SE ”.
•
Place the item to be set at 100% on the pan, and press
[Zero]
Key
when the stability indicator comes on.
•
The display will show
“100.0
%
”
.
•
When another item with a different weight value is put on the pan, the
relative % value would be shown against the initial reference sample
value.
•
Press
[Func]
key to exit and go back to weighing mode.
5.4.3 CALIBRATION
•
Refer to section 7 for details
