background image

© Adam Equipment Company 2014

16

 

WEEE 2012/19/EU 

This device may not be disposed of in domestic waste. This also applies to countries outside the EU, per their 
specific requirements. Disposal of batteries (if fitted) must conform to local laws and restrictions. 
Cet appareil ne peut être éliminé avec les déchets ménagers. L’élimination de la batterie doit être effectuée 
conformément aux lois et restrictions locales. 
Dieses Gerät nicht mit dem Hausmüll entsorgt. 
Dispositivo no puede ser desechado junto con los residuos domésticos 
Dispositivo non può essere smaltito nei rifiuti domestici. 

FCC / IC CLASS A DIGITAL DEVICE EMC VERIFICATION STATEMENT

 

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC rules and Canadian ICES-003/NMB-003 regulation. These 
limits are designed to provide reasonable protection against harmful interference when the equipment 
is operated in a commercial environment.  This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications.  Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the interference 
at his own expense. 

CALIFORNIA PROPOSITION 65 - MANDATORY STATEMENT 

WARNING: This product includes a sealed lead-acid battery which contains chemicals known to the 
State of California to cause cancer and birth defects or other reproductive harm. 

Adam Equipment products have been tested with, and are always supplied with mains power 
adaptors which meet all legal requirements for the intended country or region of operation, 
including electrical safety, interference and energy efficiency. As we often update adaptor 
products to meet changing legislation it is not possible to refer to the exact model in this 
manual. Please contact us if you need specifications or safety information for your particular 
item. Do not attempt to connect or use an adaptor not supplied by us. 

Summary of Contents for LBK Series





















Reviews: