background image

 

                                    © Adam Equipment Company 2014

 

WARRANTY

 

INFORMATION 

 

Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed due to 
defects in materials or workmanship.  Warranty starts from the date of delivery. 
 
During the warranty period, should any repairs be necessary, the purchaser must inform its 
supplier or Adam Equipment Company. The company or its authorised Technician reserves the 
right to repair or replace the components at any of its workshops depending on the severity of 
the problems. However, any freight involved in sending the faulty units or parts to the service 
centre should be borne by the purchaser. 
 
The warranty will cease to operate if the equipment is not returned in the original packaging 
and with correct documentation for a claim to be processed. All claims are at the sole discretion 
of Adam Equipment. 
 
This warranty does not cover equipment where defects or poor performance is due to misuse, 
accidental damage, exposure to radioactive or corrosive materials, negligence, faulty 
installation, unauthorised modifications or attempted repair or failure to observe the 
requirements and recommendations as given in this User Manual. Additionally rechargeable 
batteries (where supplied) are not covered under warranty. 
        
Repairs carried out under the warranty does not extend the warranty period. Components 
removed during the warranty repairs become the company property. 
        
The statutory right of the purchaser is not affected by this warranty. The terms of this warranty 
is governed by the UK law. For complete details on Warranty Information, see the terms and 
conditions of sale available on our web-site. 

Summary of Contents for MDW-160M

















Reviews: