Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. A level surface is required, otherwise there is a high risk that it could fall over.
7. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
8. Do not modify this equipment.
9. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
10. Plastic bags must be kept out of reach of children.
11. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-
pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Drawer on ball-bearing chassis rail
2/3 extension ball race drawer slide without removable coupling
Non-lockable
ASSEMBLY
Always attach the drawer at the front using all four screws.
Please note that the maximum load-carrying capacity of the drawers only applies if the drawer is supported, in addition
to being mounting at the front. In the case of heavy loads, the drawers should never be installed in the rack on its own,
but always above other drawers or devices, which in turn need to be supported.
SPECIFICATIONS
87401E / 87402E / 87403E
Rack Drawer steel 1 U / 2 U / 3 U
Model name
87401E
87402E
87403E
Product type
rack drawer
rack drawer
rack drawer
Material
steel
steel
steel
Surface
powder coated
powder coated
powder coated
Colour
black
black
black
Outside height
1 U
2 U
3 U
Outside width
434 mm
434 mm
434 mm
Outside depth
392 mm
392 mm
392 mm
Inside height
37 mm
75 mm
115 mm
Inside width
401 mm
401 mm
401 mm
Inside depth
377 mm
377 mm
377 mm
Material thickness
1,2 mm
1,2 mm
1,2 mm
max. load
25 kg
25 kg
25 kg
Weight
5.8 kg
7.9 kg
7.3 kg