Adam Hall GmbH
· Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
Telephone: +49 (0) 60 81 9419 - 0 · Fax: +49 (0) 60 81 9419 - 1000 ·
adamhall
.com
STBA 01
TABLE MICROPHONE BOOM ARM WITH
INTEGRATED XLR CABLE
SAFETY INFORMATION
01. Please read these instructions carefully.
02. Keep all information and instructions in a safe place.
03. Follow the instructions.
04. Observe all safety warnings. Never remove safety warnings
or other information from the equipment.
05. Use the equipment only in the intended manner and
for the intended purpose.
06. Use only sufficiently stable and compatible stands and/ or mounts (for
fixed installations). Make certain that wall mounts are properly installed
and secured. Make certain that the equipment is installed securely and
cannot fall down.
07. During installation, observe the applicable safety regulations
for your country.
08. Never install and operate the equipment near radiators, heat registers,
ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
09. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not
apply to special outdoor equipment - in this case, observe the special
instructions noted below. Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment.
Do not place containers filled with liquids, such as vases or drinking
vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and
intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent
damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down
and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects
have gotten inside the equipment or if it has been damaged in another
way, switch it off immediately and unplug it from the mains outlet
(if it is a powered device). This equipment may only be repaired by
authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper cardboard.
21. Plastic bags must be kept out of reach of children.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall. com/media/pdf/MANUFACTURERS-DECLARATIONS_
ADAM_HALL.pdf
To request warranty service for a product, please contact
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu Anspach
Email. Info@adamhall.com | 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is to
avoid environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product
DESCRIPTION
• Ideal for recording studios and multimedia applications
• Spring holders for simple adjustments
• Integrated microphone cable
• Clamp or base provided for table attachment
SPECIFICATIONS
Product number
STBA01
Product type
Stands and tripods
Type
Microphone stands
Arm material
Steel
Arm color
Black
Arm surface
Powder coated
Arm height max.
1000 mm
Cabel length
3000 mm
Base type
Table clamp
Weight
1.21 kg
