Adam Sub10 MK2, Manual

Manual Sub10 MK 2 - 

page 2 

Manual Sub10 MK 2 - 

page 3 

Safety Instructions

In case of a problem, please either contact your ADAM dealer or us. We are happy 
to try and help. Always refer servicing to qualified personnel and never attempt to 
repair this product by yourself. Please read through the following safety instructions 
completely before setting your system up.

•   Do not open the monitor. There are no user-serviceable parts inside.

•   Do not expose this product to rain or moisture, never wet the inside with  
  any liquid and never pour or spill liquids directly onto this unit.

•  Never use flammable or combustible chemicals for cleaning audio  
  components

•  Avoid touching the speaker membranes and do not block the woofer’s  
  ventilation ports.

•  Assure free airflow behind the speakers to maintain sufficient cooling.

•  Always use fully checked cables. Defective cables can harm your speakers.  
  They are a common source for any kind of noise, hum, crackling etc.

•  Always switch off your entire system before connecting or disconnecting  
  any cables, or when cleaning any components.

•  This product, as well as all attached extension cords, must be terminated  
  with an earth ground three-conductor AC mains power cord.  To prevent  
  shock hazard, all three components must always be used.

•  Never replace any fuse with a value or type other than those specified.  
  Never bypass any fuse.

•  Never expose this product to extremely high or low temperatures

•  Never operate this product in an explosive atmosphere.

•  Always keep electrical equipment out of the reach of children.

•  Always unplug sensitive electronic equipment during lightning storms.