7
5- MAINTENANCE & CLEANING
For user no need to the maintenance to STABILIZER. Only on periodical, clean the
dust on the fan with a vacuum.
Do the cleaning during the input fuses OFF and BYPASS switch is in “
0
“ position
for human health.
Do not use detergents or any cleaning material that may damage the plastic
surfaces.
Do not let any liquid get into the STABILIZER.
Ensure that the air holes are open.
The STABILIZER body can be wiped with a clean and dry cloth.
6- TROUBLESHOOTING
If any errors of faults are observed on the STABILIZER, make sure you check the
following points before informing the authorized technical service:
• Does the distribution panel have mains connection?
• Have the Input / Automatic fuses blown off?
Informing the authorized service about the STABILIZER:
• Information found on the product label (model, no)
• Describe the problem in detail.
7- STORAGE
The unit has to be stored in a dry place between –30
°
C and 70
°
C.
