background image

Adamson Systems Engineering  |  

Table of Contents

Read these instructions, keep them available for reference.

This manual can be downloaded from

Heed all warnings and follow all instructions.

A qualifi ed technician must be present during the installation and use of this product. This product 

is capable of producing extremely high sound pressure levels and should be used according to the 

specifi ed local sound level regulations and good judgement. Adamson Systems Engineering will 

not be liable for damages caused by any possible misuse of this product.

Servicing  is  required  when  the  loudspeaker  has  been  damaged  in  any  way,  such  as  when  the 

loudspeaker has been dropped; or when for undetermined reasons the loudspeaker does not 

operate normally. Inspect your products regularly for any visual or functionality irregularities.

Protect the cabling from being walked on or pinched.

View the S-Series Rigging Tutorial video and/or read the S-Series Rigging Manual before suspending 

the product.

Pay attention to rigging instructions included in both Blueprint and the S-Series Rigging Manual.

Use only with the rigging frames/accessories specifi ed by Adamson, or sold with the loudspeaker 

system.

This speaker enclosure is capable of creating a strong magnetic fi eld.  Please use caution around 

the enclosure with data storage devices such as hard drives.

Safety & Warnings

__________________________________________________________________________________________

__________________________________________________________________________________________

__________________________________________________________________________________________

__________________________________________________________________________________________

__________________________________________________________________________________________

__________________________________________________________________________________________

__________________________________________________________________________________________

3

4

5

6

7

8

9

In an effort to continuously improve its products, Adamson releases 

updated accompanying software, presets and standards for its products.

Adamson reserves the right to change the specifications of its 

products and the content of its documents with no prior notice.  

Page 1

S10 User Manual

Summary of Contents for 973-0003










Reviews: