Adamson Systems Engineering | Metrix-i Product Information Booklet
Page 2
© 2014 Adamson Systems Engineering. All rights reserved. No part of this publication may be reproduced or transmitted in
any form or by any means without the express written consent of the publisher
Important Operating Instructions
- Notification of instructions that must be strictly
followed to ensure proper use of the product.
Warning
- Indication of a potential risk of harm to an individual or possibility of
damage to the product.
Symbols
Congratulations on your purchase of the Adamson Systems Engineering Metrix-i line array enclosure.
Included in your shipment should be:
1x Metrix-i enclosure
All products manufactured by Adamson Systems Engineering are inspected before packaging and shipping and should arrive
free from technical and visual defects. After opening the shipping container, check for any damage. If found, please notify
your Adamson representative immediately. The consignee should then initiate a damage claim with the shipping agent. Be
sure to save all contents and packing materials to be inspected by the carrier.
Read this document thoroughly and completely to become familiar with the product. Also read the product manual containing
vital information regarding proper use and safety limits of this product. All accompanying documentation can also be ob-
tained by contacting your Adamson representative, or through the website at
http://www.adamsonsystems.com/
.
We are always improving our products and technology, and as such, Adamson Systems Engineering reserves the right to
change the contents of its documents without prior notice. Please refer to Adamson Systems Engineering’s website for up to
date documentation.
General Information
