16
1
2
3. HANDLING CARONY GO
Control box arm
Lock mode
The control box arm is lowered as
follows:
1.
Pull the release button, placed on top
of the arm, towards the back and lower
the arm.
2.
At this stage the control box has also
been released and can be folded to the
side.
The control box arm is raised as
follows:
1.
Pull the release button towards
the back and the arm will rise by
itself.
2.
Return the control box to opera-
ting position.
Reduces speed in 5
different settings
Increases speed in 5
different settings
Hazard lights
Indicate left
Indicate right
Battery status
left: low right:
high
ON/OFF
1 Seat height adjustment
2 Not in use
Lights
Fault indicator
Signal
Memorized settings
All settings, such as speed, seat
height etc., are saved when the
wheelchair is turned off and remain
memorized as it’s turned on again.
The control box
The lengthwise position of the
control box arm is adjusted as follows:
1.
Unscrew the socket head cap screw placed in
the groove by the arm attachment in the wheelchair
frame.
2.
Adjust and tighten the screw.
When keeping the ON/OFF button pressed for 4
seconds the control box will enter
lock mode
.
To unlock:
press the horn button twice
.
Summary of Contents for CARONY GO!
