Inserting and Removing Memory Cards
The Adaptec Media Reader is equipped with four multi-format slots. The
Figure below illustrates how to align your memory cards when inserting
them into the card reader.
SmartMedia
MS / MS-PRO /
MS-Duo / MS-PRO-Duo
CompactFlash /
Microdrive
Mini-SD (
LEFT edge
)
Reverse
SD / MMC / T-Flash (with adapter) / RS-MMC
Figure 1: Memory Cards Slots
To insert a memory card into your Adaptec Media
Reader:
1 Align the card as shown above.
2 Slide it into the correct slot as far as it will go. When the card is
inserted correctly, it will protrude slightly from the Media Reader.
3 Most cards can be accessed with the top facing up except:
Mini-SD: Insert the card into the
LEFT
edge
of the slot with the
pins facing up.
SmartMedia (SM): Insert the card with the pins facing up.
T-Flash: An adapter is required. Insert it with the top facing up.
11