6
The Adaptec SCSI Card 39320 has two separate Ultra320/160
SCSI channels, as shown in the figure on page 1. Both channels
have an internal LVD/SE connector to which you can connect
internal SCSI devices.
Follow these steps to connect your internal Ultra320/160 and
Ultra2 devices:
Locate a 68-pin internal LVD SCSI cable, which may have either
twisted wires or flat wires, as shown here.
Adaptec recommends that you keep your Ultra320/160
and Ultra2 SCSI devices on a separate SCSI channel from your
Ultra SCSI devices. This allows the newer Ultra320/160 and
Ultra2 SCSI devices to transfer data at their maximum speed.
N
OTE
S
TEP
1
Terminated end
Nonterminated end
ASC-39320 IG.fm Page 6 Monday, August 12, 2002 9:36 AM
