3-61
container Commands
container move
To renumber an array, use the
container move
command. If
another array already has the new number, the command returns
an error.
Notes
A controller currently supports 24 visible arrays. A visible array is
an array that is visible to the operating system and users. Visible
arrays are identified with container IDs 0 through 23.
Container IDs 24 through 63 are reserved for hidden arrays. A
hidden array is an array that is not visible to the operating system
and can only be used by other arrays. (The
container list
command, however, displays hidden arrays.)
The
container move
command does not prevent you from
assigning a hidden container ID (24 through 63) to a visible array. If
you assign a visible array with a hidden container ID (24 through
63), the operating system no longer sees the visible array. In
general, when renumbering a visible array, use container IDs 0
through 23. When renumbering a hidden array, use container IDs
24 through 63.
Syntax
container move {container} {container}
Parameters
{container}
Specifies the ID number (0 to 63) of the array to renumber.
{container}
Specifies the ID number (0 to 63) to assign to the array
specified in the first
container
parameter.
Summary of Contents for AAR-2020SA
Page 1: ...R Command Line Interface Reference Guide...
Page 107: ...3 76 container Commands container extend file_system page 3 40 container list page 3 50...
Page 170: ...4 24 controller Commands Related Commands controller commands controller details page 4 2...
Page 220: ...7 4 logfile Commands Related Commands logfile commands logfile end page 7 2...
