27
Configuring Your Wireless Router
Adjusting the LAN Settings
You must adjust the LAN settings on your Wireless Router if you
are connecting wired network stations.
Note:
for a list of information
you’ll need to successfully adjust the LAN settings.
To adjust the LAN settings:
1
Open the Utility and log in. (See
.)
2
Click
LAN
under Basic Setup
on the menu list.
The Basic Setup (LAN) page opens. (Refer to this Figure as you
work through the Steps 3, 4, and 5.)
3
Choose a DHCP Server setting:
■
Set DHCP Server to
Disabled
if you want to use fixed IP
addresses for your network stations, then skip to
. (You must manually assign IP addresses to your
network stations. Refer to your operating system’s
documentation for more information.)
■
Set DHCP Server to
Enabled
if you want your Wireless
Router to automatically assign IP addresses to the stations
on your network that are set up for DHCP configuration.
(Network stations not set up for DHCP configuration must
have their IP addresses assigned manually. Refer to your
operating system’s documentation for more information.)
Continue with
to complete the basic LAN set-up.
