47
Changing the Setup of Your WLAN
Filtering MAC Addresses
You can control which wireless stations can connect to your
Wireless Router by enabling MAC address filtering.
To enable and set up MAC address filtering:
1
Open the Utility and log in. (See
.)
2
Click
Wireless (802.11)
under Basic Setup
on the menu list.
3
Click the
Connection
tab.
4
Select a MAC Filtering setting.
■
Select
Allow all except listed below
to exclude specific
stations from accessing your network.
■
Select
Deny
all except listed below
to exclude all
unspecified stations from accessing your network.
5
Add a MAC address to the list by typing the address in the
bottom text box and clicking
Add to List
. Repeat until all
required MAC addresses are added.
6
Click
Save & Restart
.
To remove a MAC address from the list:
1
Click on the desired MAC address, then click
Remove selected
from list
.
2
Click
Save & Restart
.
