4-19
Duralink64 Configurations for Windows
13
Select one of these options:
– Obtain an IP address automatically. The system can
automatically obtain the IP address from a DHCP server.
– Use the following IP address. If your LAN system does not
automatically assign IP addresses, you can manually assign
the TCP/IP address and Subnet mask.
– Use the following DNS server addresses. Enter DNS server
preferred and alternate addresses.
14
To assign an IP address to the next Adaptec NIC port, repeat
Steps 3 through 8.
15
Click OK. This takes you back to the Local Area Connection
Properties screen.
Assigning TCP/IP Address in Windows NT 4.0
Once you have configured Duralink64 Port Aggregation,
Windows NT prompts you to configure the protocol. IP addresses
to groups and standalone ports are assigned in the IP Address tab
(such as those shown in the following figure). Ports assigned to a
group use the same IP address; therefore, it must be entered only
once.
