2-4
DuraStor 6220SS/7220SS Installation and User’s Guide
Operator Control Panel (OCP)
The OCP is located on the front bezel of the DuraStor RAID
appliance, and can be used to build and monitor your storage
subsystem if you are unable to use a computer monitor and storage
management software such as Storage Manager Pro.
For more information on the OCP, see
Appendix B,
The Operator
Control Panel of the DuraStor RAID Appliance
.
Controller Canister
The DuraStor RAID appliance contains two controller canisters
(see
Figure 2-5
), each capable of housing a RAID controller.
The DuraStor SCSI RAID appliance contains a DuraStor 6200S
RAID controller preinstalled; the second controller canister is
empty. The empty canister contains the hardware you need to
install a second controller.
The DuraStor Fibre Channel-to-SCSI RAID appliance contains one
DuraStor 7200S RAID controller preinstalled; the second controller
canister is empty. The empty canister contains the hardware you
need to install a second controller.
Figure 2-5. DuraStor RAID Appliance Controller Canister
The controller canister fits into the front of the chassis, behind the
bezel, and is easily removable for quick controller installation or
replacement. See
Replacing a RAID Controller
on page 5-2
for details.
Latches
RAID Controller Installed Inside
Ready LED
DuraStor IUG.book Page 4 Wednesday, January 30, 2002 10:49 AM
