www.receive-all.com
Adaptive Solutions, LLC
INSTRUCTIONS
1. MOUNTING ITEM TO ADAPTER
THERE ARE TWO METHODS FOR USING THE CABLE-TIES TO MOUNT THE ITEMS TO THE
ADAPTERS: LOOPING AROUND
(METHOD A)
OR OVER THE TOP
(METHOD B)
. LOOPING AROUND
IS EASIEST, AND GOING OVER THE TOP WORKS BEST FOR SMALLER ITEMS. SEE ILLUSTRAITON
FOR DETAILS. ONCE THE ITEM IS IN THE CORRECT POSITION, PULL CABLE-TIES TIGHT AND USE
A SCISSORS TO REMOVE THE EXCESS MATERIAL. TWO OR THREE CABLE-TIES ARE SUFFICIENT
FOR ATTACHING MOST ITEMS. BE SURE THE ITEM DOES NOT EXTEND PAST THE REAR OF THE
ADAPTER, OTHERWISE THE ITEM WILL NOT ATTACH TO THE ARM BRACE.
2. MOUNTING ARM BRACE
PLACE ARM BRACE ON ARM BY LOOSENING VELCRO
STRAPS AND SLIDING ARM THROUGH OPENING OF
LOOP. PLACE FRONT REST IN PALM OF HAND SO THAT
THE FRONT STRAP CAN BE SECURED BEHIND THE
KNUCKLES. TIGHTEN REAR STRAP
AROUND FOREARM. FOREARM CRADLE
CAN BE SQUEEZED TOGETHER FOR
SMALLER ARMS, OR EXPANDED FOR
LARGER ARMS.
*ALWAYS CHECK SKIN FOR REDNESS
NEAR THE STRAPS AND OTHER CONTACT
AREAS. THIS IS ESPECIALLY IMPORTANT
FOR THOSE WITH REDUCED SENSATION.*
METHOD A
METHOD B
