Remote Control Programming Manual
Basic sign operation: Clearing a sign’s memory
5
Clearing a sign’s memory
NOTE: Clearing a sign’s memory erases all messages, graphics, and
the password that have been programmed into the sign.
Step
When you do this...
You see this...
1
Press
PROGRAM
.
2
Press
BACK
until CLEAR MEMORY appears.
3
Press
ADV.
4
Press
Y
to clear the sign’s memory. The sign will return to normal operation and display a series of demo
messages.
PROG TEXT A
CLEAR MEMORY
WARNING!
THEN
CLEAR ALL? Y/N