TouchEntry
®
-XT
1.3 Interfaces
All connections are located on the bottom of the terminal.
1.3.1 Ethernet, Power over Ethernet (PoE)
An Ethernet connection can be established via the Ethernet
socket.
For power supply via Ethernet (PoE) a PoE-capable switch or
a PoE injector is required.
1.3.2 2Wire connection
If the terminal was ordered with the 2Wire option, the
wire ends of the 2Wire cable must be connected to the
2Wire socket.
For long distances, it is important to ensure a sufficient
wire cross-section.
For more information, refer to the installation guide and
manual of the 2Wire converter.
Installation
3
