EN - 10
Setup
Display System
1. Touch the upper left corner to display the main menu.
2. Touch [
].
The settings menu is displayed.
Adjust General Settings
1. Touch [
General
], if necessary.
2. Touch to highlight a setting.
3. Touch to display/select an option.
4. Touch blank area of the screen to exit.
General settings Options
Description
Radio region
USA/China/Japan/Europe/Europe
(LW)/OIRT
Select one that matches your location.
Radio range
Local
Select Local to receive only stations with extremely
strong signal.
Distance
Beep
On
Turn on the beep sound. Each time you press a button,
the unit beeps.
Off
Turn off the beep sound.
Calibration
Start
Calibrate the touch screen.
Calibration
When the touch operation is not sensitive or valid, you should calibrate the touch screen using the
calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [
Calibration
] option on the setup menu to enter.
2. Touch [
Yes
] to enter.
3. Press and hold the center of [
+
] for 5 seconds, the [
+
] will move automatically.
4. Aim at center of [
+
], follow the path as shown in the figure. Once steps 1-4 are complete the
system will automatically exit calibrating mode.
Adjust Video Settings
1. Touch [
Video
].
2. Touch an option repeatedly to select.
Video settings
Options Description
Aspect Ratio
Full
Adjust aspect ratio.
Normal
Rear Camera
Mirror
Reverse the camera image as if looking through a rear-view mirror.
Normal
Parking
On
Disable video when driving.
Off
Enable video when driving.
When in Park “On” mode, the screen will display WARNING information if you play the video. The
arning screen will prevent the driver from watching videos for safety.
