Adayo JRV9100, Operating Instructions Manual

7

JRV9100

Parking Brake Inhibit

•  When the “BRAKE” cable is connected 

to the brake switch, the display on the 

TFT monitor will display video only 

when the vehicle is applied.

•  Parking brake function is overridden 

when the video source is set to 

REVERSE.

•  When  the  parking  brake  inhibit 

is active, the front monitor displays 

“Warning!!!  It  is  illegal  to  view  video 

while driving or operating a motor 

vehicle. Set parking brake to view 

video.”, preventing the driver from 

watching content while driving. Rear 

video screens are not affected.

Mute

Press [ 

 ] button to mute the 

volume from the unit. Press again to 

restore the volume. 

Adjusting  the  volume  or  using  any  of 

the audio setup features cancels the 

mute function. 

Power On / Off

Press the [ 

 ] knob on the unit 

to turn the unit on. The buttons on the 

front of the unit light up for a moment 

and the current mode status appears in 

the LCD. 

Press and hold the [ 

 ] knob to 

power off the unit. 

Basic Operations

Playing Source Selection

Press the [   ] button on the front 

panel to change between available 

playing sources. The playing mode is 

displayed on the screen.

6

1

3

5

2

7

7

1. Enter radio mode.

2. Enter music menu.

3. Show main menu

4. Enter bluetooth mode.

5. Enter setting menu.

6. Function icons

7. Clock

Volume Adjustment

To increase or decrease the volume 

level, rotate the [ 

 ] knob on the 

front panel. The volume ranges from 

“0”to “40”.