ADB Safegate FLA, User Manual

1.1.3 Material Handling Precautions : Storage

CAUTION

Improper Storage

Store this equipment properly

• If equipment is to be stored prior to installation, it must be protected from the weather and kept free

of condensation and dust.

Failure to follow this instruction can result in equipment damage

1.1.4 Arc Flash and Electric Shock Hazard

DANGER

Series Circuits have Hazardous Voltages

This equipment produces high voltages to maintain the specified current - Do NOT Disconnect while

energized.

• Allow only qualified personnel to perform maintenance, troubleshooting, and repair tasks.
• Only persons who are properly trained and familiar with ADB SAFEGATE equipment are permitted to

service this equipment.

• An open airfield current circuit is capable of generating >5000 Vac and may appear OFF to a meter.
• Never unplug a device from a constant current circuit while it is operating. Arc flash may result.
• Disconnect and lock out electrical power.
• Always use safety devices when working on this equipment.
• Follow the recommended maintenance procedures in the product manuals.
• Do not service or adjust any equipment unless another person trained in first aid and CPR is present.
• Connect all disconnected equipment ground cables and wires after servicing equipment. Ground all

conductive equipment.

• Use only approved ADB SAFEGATE replacement parts. Using unapproved parts or making

unapproved modifications to equipment may void agency approvals and create safety hazards.

• Check the interlock systems periodically to ensure their effectiveness.
• Do not attempt to service electrical equipment if standing water is present. Use caution when

servicing electrical equipment in a high-humidity environment.

• Use tools with insulated handles when working with airfield electrical equipment.

Failure to follow thess instructions can result in death or equipment damage

96A0489, Rev. B, 2018/03/06

3

Copyright 

©

 2017–2018 ADB Safegate, All Rights Reserved