P.DG A4001N
© (2011) ADB Broadband S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Hardware Installation
23
ETHERNET CONNECTION
>> MS WINDOWS VISTA /
WINDOWS 7
To configure TCP/IP on MS Windows Vista / Windows 7 Operating Systems fol-
low these steps:
1.
Select
Start -> Control Panel -> Network & Internet
and make a double click
on the
Network Connections
icon.
2.
Select the adapter card interested by TCP/IP configuration.
3.
Select the
Properties
item from the contextual Adapter Card menu.
4.
Select in the
General
TAB panel, the
Internet Protocol (TCP/IPv4)
item and
then click on
Properties
button.
5.
In the
General
TAB panel, check the
Obtain an IP address automatically
radio
button and the
Obtain DNS server address automatically
radio button. Click
on
OK
button.
DISABLE HTTP PROXY
You need to verify that the “
HTTP proxy
” feature of your web browser is dis-
abled. This is required in order that your browser can view the Gateway’s
HTML configuration pages.
OBTAIN IP SETTINGS
FROM YOUR DATA
GATEWAY
>> MS WINDOWS 98SE, ME,
2000
Now that you’ve configured your computer to connect to your Data Gateway, it
needs to obtain new network settings. By releasing old DHCP IP settings and
renewing them with settings from your Data Gateway, you can verify that you’ve
configured your computer correctly.
1.
On the Windows desktop, select the
Start > Programs > Accessories >
Command Prompt
menu item
2.
In the Command prompt window, type “
ipconfig/release
” and press the
EN-
TER
key