Page 34
Rev. : 002
HF - VISION 10 & PHOENIX
Lighting Technologies
9.5.5.6. Polling
Enables the senders to communicate. Both check-boxes should be marked.
9.5.5.7. Download
Allows you to define how the senders routed via the receiver should download their
data onto the SCC computer – one record at a time or all records at once. Both
check-boxes should be marked.
9.5.5.8. Name
Allows you to define a file name into which downloaded data is being logged. Type
in any file name or leave default name.
9.5.5.9. Append / Overwrite
Defines whether you want the log-file to be replace every time you start SCC or that
data should be added to the file. Chose one of both methods.
9.5.5.10. Separate
Allows you to define the character that will separate the fields by inserting it directly
or, if the character does not appear on the keyboard, by inserting the corresponding
decimal value from the ASCII table.
9.5.5.11. Set-up
Allows to send the properties defined to the terminal. When you
select this key, the following dialogue box will appear, prompting you to confirm the
transmission parameters.
9.5.5.12. Find
If the same properties have to be given to several receivers / satellites, this function
key initiates a sequential search for an identifying number from 101 to 104
(theoretical upper limit: 199). The current properties will automatically be given to the
object of the search.
Remark:
The addresses of the up to four receivers in a multiple receiver installation are 101,
102, 103, and 104
