Page 5
Rev. : 002
HF - VISION 10 & PHOENIX
Lighting Technologies
3. Generalities - Safety
The equipment is built in accordance with European safety standards and requires
imperatively a safety earth connection in compliance with local regulations.
To prevent any risk of electric shock, do not remove any cover or part of the enclosure.
Access to internal parts is not required for normal operation.
Refer servicing to skilled and trained service personnel exclusively.
Disconnect from the power supply prior to opening for inspection or service.
Connection to any inappropriate power source may irreversibly damage the equipment,
it is the user's responsibility to use the equipment for its intended purpose and to check
the equipment connected to it.
To obtain full benefits of the safety measures, the equipment shall be installed and
serviced by skilled and trained personnel exclusively.
Don't make any modification to the equipment.
ADB shall not accept any liability for material damages or injuries which may result from
unauthorised modifications.
Important Notice for Power Cables
Power supply cables and connectors are an important part of your equipment and
contribute to its safety.
•
always use original power supply adapters only! Using any other psu may cause
irreversible damage to the unit.
•
always use an isolator, main circuit-breaker or main fuses to interrupt the link;
never pull on the cable
•
do not damage the cable or the connectors in any way, check them at each
installation or at regular intervals in a permanent installation
•
do not tie together power supply cables and signal cables
