Key
Function
INPUT
in
STB
mode is used to
view other video sources (
A
or
B
).
In other modes, use
INPUT
to
switch between the source inputs on
the device you are controlling.
All other keys not mentioned in this
manually, currently, have no
assigned function
Device Table
NOTE:
Please refer to the table below when performing the instructions in “Programming Device
Control” on page 8 or “Setting Up a Combo Unit” on page 9. After programming, the Potenza ST
Universal Remote Control will be able to control the following types of devices:
Device Key
Controls these types of
devices
Television.
Audio Amplifier, Tuner, or
Receiver
DVD Player, or extr a VCR,
TV/VCR Combo or PVR
Can be programmed as an
additional TV/VCR/DVD or
VCR
Set top box
7