Installation
150-454-111-06
8
February 25, 2000
HRE-454
I
NSTALLATION
U
NPACKING
AND
I
NSPECTING
Y
OUR
S
HIPMENT
When you receive the equipment, inspect it for signs of damage. If damage has occurred, immediately report the
extent of damage to the transportation company and to ADC Telecommunications, Inc. (see
for more information).
Your shipment should consist of:
•
One HRE-454
•
One HTC-400 test card
•
HiGain Remote Enclosure HRE-454 List 1A, List 2A, List 1B, List 2B, List 3, List 4, List 5, and List 6
Technical Practice
Before installing the HRE-454, unpack and inspect it for missing components and physical damage that may have
occurred during shipping. To unpack the enclosure:
1
Remove the HRE-454 from its shipping carton.
2
Perform an inventory to verify that all equipment listed on the packing list is present.
3
Inspect the enclosure for shipping damage.
4
Check the card cage for any sign of breakage.
5
Check the O-ring for any sign of damage.
6
Find and loosen the retaining screws at the rear base of the card cage.
7
Tilt the card cage on its hinge.
8
Lower the card cage to its level position and tighten the screws to lock it in position. ADC recommends
always keeping the card cage in a level, locked position.
9
Report any damage to the carrier immediately.
If you must store the equipment for a prolonged period of time, store it in the container shipped
with your equipment.
An HTC-400 test card is included with every HRE-454. This unit is found in a separate box inside
the HRE-454 shipping carton. The test card provides an easy-to-use way of accessing and
testing the four cable pairs connected to every HRE-454 slot. The test card is provided free of
charge for your convenience.
