150-357-200-02, Issue 2
Provisioning
HXU-357 List 1
February 9, 1999
29
M
INIMAL
C
ONFIGURATION
R
EQUIREMENTS
Following is a checklist of minimal configuration tasks for HXU-357
operation. This list is intended only as a guideline and should be subordinate
to any system installation plan.
1
Set up the multiplexer channel. (See
“Setting up the Communications
Channel to the HXU-357” on page 31
2
Configure system settings by selecting System Administration from the
Root Menu. For more information, refer to
Type
,
Change System Settings. Provide the necessary information
for the following selections. These settings should match the settings for
the HMU.
Date =
Time =
System name =
System location =
Contact person =
3
Set up network addressing under System Administration. These settings
should match the settings for the HMU. For more information, refer to
“Setting up System Administration” on page 32
.
Type
,
Change IP Address. Supply the necessary address
information.
Local Ethernet IP Address =
Subnet mask =
Gateway IP address =
Trap IP address #1 =
Replacement of a standby HXU-357 does not ordinarily
require configuration changes. The online multiplexer
automatically configures the standby multiplexer.
5
2
1
2
3
4
5
5
3
1
2
3
4
