150-357-200-02, Issue 2
Provisioning
HXU-357 List 1
February 9, 1999
47
Accessing the System Administration Screen
Upon connecting to the HMU-319, the TL1 prompt (<), appears.
1
Type
and press
to invoke TAO. The default password is
public.
2
Type the password and then press
. The Network Status menu
appears.
3
Type the number of the shelf (1 through 32) and then press
. The
Shelf Status menu appears.
4
From the Shelf Status menu, select
to log onto the multiplexer.
5
At the multiplexer logon prompt (ID:), type a valid password to display
the Root menu. The default password is
public
.
6
Select
, System Administration.
Verifying the Multiplexer IP Address
1
Select
, Change IP Address.
2
Verify that Local Ethernet IP address (selection
) and Subnet Mask
(selection
) are set to the proper values. These addresses should be
defined in the Screen Options screen.
If the Shelf Status menu appears instead, this indicates that
the HMU is managing a single shelf and the HMU IP address
has not been set. Set the HMU IP address before proceeding.
1
Type
to select the Options menu.
2
Type
to configure the local IP address.
3
Enter the address, and then return to the Shelf Status
menu.
TAO
ENTER
ENTER
O
A
ENTER
M
5
3
1
2
