ADCP-80-353 • Issue 2 • August 2002 • Preface
Page v
©
2002, ADC Telecommunications, Inc.
ABOUT THIS MANUAL
This
Installation Guide describes ADC’s DSX-3 (DSX-4U-24) Rear Cross-Connect System and
provides
all instructions necessary to install the system.
RELATED PUBLICATIONS
Listed
below are related manuals and their publication numbers. Copies of these publications can
be
ordered by contacting the Technical Assistance Center at 1-800-366-3891, extension 73475
(in
U.S.A. or Canada) or 952-917-3475 (outside U.S.A. and Canada).
DS3
Digital Signal Cross-Connect (DSX-3) System Applications Guide
80-323
Unequal
Flange Rack Installation Instructions
80-345
ADMONISHMENTS
Important
safety admonishments are used throughout this manual to warn of possible hazards to
persons
or equipment. An admonishment identifies a possible hazard and then explains what
may
happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings,
and Cautions — must be followed at all times. These warnings are flagged by use of
the
triangular alert icon (seen below), and are listed in descending order of severity of injury or
damage
and likelihood of occurrence.
Title
ADCP Number
Danger:
Danger is used to indicate the presence of a hazard that will cause severe personal
injury,
death, or substantial property damage if the hazard is not avoided.
Warning:
Warning is used to indicate the presence of a hazard that can cause severe personal
injury,
death, or substantial property damage if the hazard is not avoided.
Caution:
Caution is used to indicate the presence of a hazard that will or can cause minor
personal
injury or property damage if the hazard is not avoided.
