4
SECTION II
FEATURES
A.
Dependable Microprocessor Solid State Integrated Circuitry
- to eliminate as many moving parts as
possible.
B.
Program Changes Are Easily Made At The Keyboard
- actual programs are viewed at the light
emitting diode (L.E.D.) display for verification.
C.
Automatic Drying Cycle
(Patent No. 4,827,627)
- computerized monitoring of load dryness for precise,
fast, and efficient drying.
D.
Timed (Manual) Drying Cycle
- for special loads, programming allows for a specific amount of time in
minutes for both drying and cool down cycles.
E.
Preprogrammed Cycles
- the Phase 6 OPL microprocessor controller (computer) can store in its memory
six (6) preprogrammed cycles in either the Automatic Drying Mode
(Patent No. 4,827,627)
or Manual
Drying Mode.
F.
Manually Loaded Cycles
- for occasional or one-time special loads, the user can set a specific program
in either the Automatic Drying Cycle (
Patent No. 4,827,627
) or Timed Mode.
G.
Variable (Programmable) Fabric/Temperature Selections
- accommodates the type of fabric to be
dried.
H.
Controlled Cool Down Program
- helps eliminate wrinkled loads.
I.
L.E.D. Display
- informs user of cycle status, programs and displays important diagnostic and fault codes.
J.
Anti-Wrinkle Program
- helps keep items wrinkle-free when they are not removed from the dryer
promptly at the end of the drying and cooling cycles.
K.
Diagnostics
- major circuits, including the door switch, microprocessor temperature sensor, motor and
heat output circuits are monitored.
L.
Audible Tone Signal
- a tone will sound for each keyboard (touch pad) entry. Additionally, the tone will
sound at the end of the drying and cooling cycles to indicate the cycle is complete.
M.
Temperature Conversion Status
- temperature-related programs can be set in either Fahrenheit (ºF) or
Celsius (ºC).
ALL
temperatures will automatically convert to the corresponding values (+/- 1º F) when
changes are made.
N.
Hi-Temperature Protection
- if the Phase 6 OPL microprocessor controller (computer) senses that the
temperature in the basket (tumbler) has reached 221º F, it will shut the dryer down completely, and a default
code will appear in the L.E.D. display indicating an overheating problem.
O.
Cycle Preview
- entire dryer parameters (programs) or the preprogrammed cycles are displayed for
verification upon a coded entry to the keyboard (touch pad).
