4601 I-V Meter Operation Manual
1.6.4 Power Cable
1-16
2. Connect the AC power connector on the rear panel to a 3-pin power outlet includ-
ing a ground terminal by using the power cable. (See Figure 1-8, “Connecting
Power Cable.”)
Figure 1-8 Connecting Power Cable
CAUTION:
1.
Be sure to turn OFF the POWER switch on the front panel before connecting the power cable.
2.
Select a power cable depending on the power outlet voltage and type. The power cable should conform to the
safety standards of your country.
For more information, refer to, “Safety Summary.”
3.
To prevent electric shock, connect the power cable to a 3-pin power outlet with a ground terminal. If an exten-
sion cable without a ground terminal is used, the protective ground feature will be rendered ineffective.
AC Power Connector
