4601 I-V Meter Operation Manual
2.1.1 Display Section
2-2
2.1.1
Display Section
The screen employs a dot matrix vacuum fluorescent display.
Figure 2-2 Display Section
1. Display
Displays the source value, the voltage measured value, the current
measured value, the reference current measured value and the unit
operational status.
Also, functions as a setting screen for setting parameters.
Brightness adjustment and screen ON/OFF setting are available,
helping to extend the screen lifetime and to reduce standby power
consumption.
For how to set the display, refer to J) SYSTEM in Section 4.2.10,
"MENU Key (Parameter Setting)."
2.1.2
SOURCE LIMIT Section
The SOURCE LIMIT section consists of keys to switch the voltage source range and the current limit
range.
Figure 2-3 SOURCE LIMIT Section
1.
LIMIT
key
Sets the current limit value and displays the setting value.
2.
FIT
key
Sets the optimal voltage source range or current limit range for the
setting value.
3.
DOWN
key
Lowers the voltage source range or current limit range.
4.
UP
key
Raises the voltage source range or the current limit range.
1
1
2
3
4
