4601 I-V Meter Operation Manual
3.2.2 Setting Current Limits
3-6
3.2.2
Setting Current Limits
Both positive and negative current limits can be set on the 4601 to prevent the 4601 and the devices from
overcurrent.
1. Setting the current limits
Set the current limit values to
1 A, and +0.1 A and -2 A according to the following procedure:
Operating procedure
Press
to switch to the limit setting screen. The
LIMIT
key goes ON.
The
FIT
key goes ON, which indicates the optimal range setting status.
Example display
Press
to set the limit values to
1 A.
Example display
Press
to return to the DC source mode screen.
When setting the positive limit and the negative limit to difference values, operate as follows:
1
2
3
4
8
6
5
7
10
9
1
2
3
4
