4601 I-V Meter Operation Manual
3.5 Initializing Setting Conditions
3-21
3.5
Initializing Setting Conditions
This section describes the procedure of initializing the setting conditions (parameters) of the 4601.
There are the following two types of initialization by key operations:
•
Initializing the parameters from the menu
•
Restoring to the factory default settings
For information on the initial values and the factory default settings, refer to Section 6.6.3, "Remote Com-
mand List."
3.5.1
Initializing Parameters from Menu
Press .
The
MENU
key goes ON.
Example display
Press
or
to select
G) PARAMETER
from the categories.
Example display
Press
to move to the lower level.
Example display
Press
to move to the lower level.
Example display
Press
or
or rotate the rotary knob to select
Default
.
Example display
1
2
3
4
5
