6240B DC Voltage Current Source/Monitor Operation Manual
2.2.6 Pulse Measurement
2-38
13. Press
MON
twice to switch to voltage measurement. (See Point B in Figure
2.2.6
Pulse Measurement
This section describes an example operation which uses the pulse source mode.
In this example, voltage source current measurement (VSIM) is performed as changing the measurement
points A and B in accordance with the following figure:
Figure 2-16 Pulse Measurement
Cursor (blinking)
Tds:
Source delay time
;
1 ms
Tw:
Pulse width
;
50 ms
Td1:
Measurement delay time (at A)
;
3 ms
Td2:
Measurement delay time (at B)
;
60 ms
Tp:
Period time
;
130 ms
IT:
Integration time
;
1 PLC (default)
Vp:
Pulse value
;
2 V, 2.5 V
Vb:
Base value
;
1 V, 0.5 V
