7351 Series Digital Multimeter Operation Manual
7.1.9 Measurement Time and Display Digits
7-11
For HOLD ON (Trigger source: BUS)
For HOLD ON (Trigger source: BUS) RS-232
RATE setting
Measurement speed (In Auto-range OFF)
Integration
time
DCV
DCI
2W
LP-2W
ACV
ACI
Continuity
Diode
ACV(AC+DC)
ACI(AC+DC)
FAST
74 times/s (13.5 ms) 42 times/s (23.5 ms)
2 ms
MED (50 Hz)
31 times/s (32 ms)
16 times/s (60 ms)
1 PLC
MED (60 Hz)
35 times/s (28 ms)
18 times/s (53 ms)
1 PLC
SLOW1
9 times/s (111 ms) 4.5 times/s (219 ms)
100 ms
SLOW2
4.7 times/s (211 ms) 2.3 times/s (419 ms)
200 ms
Conditions:
Auto-range: OFF, Auto-zero: OFF, Calculation: OFF, Display: OFF,
Trigger delay: 0 sec, and GPIB
RATE setting
Measurement speed (In Auto-range OFF)
Integration
time
DCV
DCI
2W
LP-2W
ACV
ACI
Continuity
Diode
ACV(AC+DC)
ACI(AC+DC)
FAST
19 times/s (51 ms)
18 times/s (53 ms)
2 ms
MED (50 Hz)
14 times/s (69 ms)
11 times/s (90 ms)
1 PLC
MED (60 Hz)
15 times/s (65 ms)
11 times/s (85 ms)
1 PLC
SLOW1
6 times/s (150 ms)
3 times/s (251 ms)
100 ms
SLOW2
4 times/s (248 ms)
2 times/s (449 ms)
200 ms
Conditions:
Auto-range: OFF, Auto-zero: OFF, Calculation: OFF, Display: OFF,
and Trigger delay: 0 sec
Baud rate: 9600, Number of data bits: 8, Parity: None, and Number
of stop bits: 1
The measurement time is from the *TRG command input
the
waiting time of the integration
until measured data is output by
using the MD? command.
