7351 Series Digital Multimeter Operation Manual
6.1.1 Response to the *IDN? Command
6-2
Specification of response to *IDN?
Changing the response to *IDN? by key operation
1. To change to the old model name response, turn on the power while pressing the
key.
2. After all displays are lit, “OLD *IDN?” is displayed and the response is changed
to the old model name.
3. When the response is set to the old model name, the ‘
’ indicator is activated at
the lower right of the display section.
4. To change to the new model name response, turn on the power while pressing the
key again.
5. After all displays are lit, “NEW *IDN?” is displayed and the response is changed
to the new model name.
6. When the response is set to the new model name, the ‘
’ indicator at the lower
right of the display section is turned off.
Changing the response to *IDN? by remote command
When the response is set to the old model name, the ‘
’ indicator is activated at the
lower right of the display section.
New model name
response
ADC Corp.,xxxxx,nnnnnnnnn,mmm
xxxxx:
7351A or 7351E (Product model name)
nnnnnnnnn:
Serial No.
mmm:
Revision No.
Old model name
response
ADC Corp.,xxxxxxxxx,nnnnnnnnn,mmm
xxxxxxxxx:
ADCE7351A or ADCE7351E (Product model name)
nnnnnnnnn:
Serial No.
mmm:
Revision No.
Command
Description
Initial value
ADC
command
OID0
The new model name is the response to *IDN?.
OID1
The old model name is the response to *IDN?.
OID?
Response: OID0 or OID1
SCPI
command
:OIDentity {ON,1|OFF,0} OFF,0: The new model name is the response to *IDN?.
ON,1: The old model name is the response to *IDN?.
:OIDentity?
Response: 1 or 0
SHIFT
SHIFT
