7352 Series Digital Multimeter Operation Manual
6.2.3 GPIB Setting
6-4
6.2.3
GPIB Setting
The following setting menu can be used when the GPIB is selected as the interface.
Address setting
1. Enter any address from 0 to 30 in ‘GP.ADR’ of
in
.
2. Press
to apply the setting.
Talk-Only setting
1. Select the following from ‘T.ONLY’ of
in
.
ON:
Talk-Only
OFF:
Addressable
2. Press
to apply the setting.
Command language selection
1. Select the following from ‘LANG’ of
in
.
ADC:
Command used in ADC CORPORATION
SCPI:
SCPI command
R6452: Command used in ADC CORPORATION’s R6452
2. Press
to apply the setting.
Continue setting (For SCPI)
1. Select the following from ‘CONT’ of
in
.
ON:
CONTINUOUS ON
OFF:
CONTINUOUS OFF
2. Press
to apply the setting.
I/F
MENU
ENTER
I/F
MENU
ENTER
I/F
MENU
ENTER
I/F
MENU
ENTER
