2007-2013 GMC 1500
Venom Front Bumper Installation Instructions
Addictive Desert Designs | Page 3
Addictive Desert Designs
6. Remove the frame bells. There is a weld along the side of each bell. To remove the bells, use a cutoff wheel to
cut along each weld. (Fig F)
7. Using a 15mm Socket, remove the skid plate mounting bolts (x4). Then, remove the skid plate. (Fig G)
Cut along this weld
and the weld in the
same spot on the
other side of the bell.
8. Prepare to install your new ADD Venom Front Bumper.
Fig F
Fig G
