18
INST
ALLA
TION
AD
DE
RLin
k
™
XD
6 1
2
RE
Receiver USB devices
Each receiver module contains a USB
hub that can support multiple v2.0 or
v1.1 USB HID (Human Interface Device)
peripherals.
From USB
devices
Front
panel
From USB
devices
Rear
panel
To connect USB devices
1
Connect your USB keyboard, mouse and any
other two USB devices to the four sockets
distributed on the front and rear panels of the
receiver module.
Receiver Remote port
The Remote port has a dual role, it can
either:
• Allow an optional remote control to be
connected to the module, or
• Create an RS232 serial connection with
the receiver module.
When serial devices are attached to the
Remote ports on the transmitter and
receiver modules, the units transparently convey the signals between them at rates up to
115200 baud - no serial configuration is required. An optional serial cable (part number:
VSC50) is available from Adder.
To connect the Remote port
1 Use the optional serial cable (VSC50) to link the Remote port on the rear panel of the
transmitter module with a vacant RS232 serial port on your host computer.
From your serial device
TRANSMITTER
LINK
VIDEO
DISPLAY(S)
USB
DEVICES
AUDIO
DEVICES
POWER
IN
REMOTE
PORT
RECEIVER
REMO
TE
TRANSMITTER
LINK
VIDEO
DISPLAY(S)
USB
DEVICES
AUDIO
DEVICES
POWER
IN
REMOTE
PORT
RECEIVER
Appendix 1
for pin-out details of the Remote port.
