addex AD500, Instruction Manual

USING THE PRESET MEMORY

This clock radio features a total of 10 preset memories of FM 

stations. These allow you to preset your favorite stations and 

access them quickly.

1.  Turn on the radio and select a radio station you like to memo-

rize.

2.  Press and hold the SET appears and “01” flashes. Press SET 

once to store Memory 1.

3.  Select another station you like to memorize. Then press and 

hold SET appears and “01” flashes. Press  



 or 



  once, “02” 

appears. Press SET once to store Memory 02.

4.  Repeat Step 2 to 3  to preset memories 3 through 10.  

5.  To access a preset station at any time, press the SET one at a 

time while the radio is on.

6.  To edit a preset station, select another station and then repeat 

Step 2 to 4. This overrides the original settings.

USING THE SLEEP TIMER

1.   Press  the  RADIO/SLEEP twice to enter the sleep mode. The 

sleep icon “L”  and the sleep time “05” (5 minutes) and will 

flash on the display.

2.   Press  the  RADIO/SLEEP again as needed to adjust the sleep 

timer from 15, 30, 45, 60, 75 or 90 minutes..

3.  When the display changes back to show the time, press the 

RADIO/SLEEP once to show the sleep time remaining.

4.  The radio will play for the programmed sleep time and then 

shut off.

5.   To turn off the radio before the sleep time has elapsed, press

                once.

USING THE PROJECTION

Press 



 once at the left side of your unit to turn on or off the 

projection.

When the projection is on, press and hold 



 to flip the projected 

time upside down.

At the back of your unit, turn the rotary knob to rotate the pro-

jected time by 90 degrees.

TO USE THE AUX FUNCTION TO PLAY MUSIC ON YOUR 

SMARTPHONE

You can play the music of your Smartphone by using the AUX 

function.

1.    Plug  in  the  AUX cable to the AUX Line-in socket at the back 

of your Radio Alarm Clock and to the earphone socket of your 

Smartphone.

2. Turn on your Smartphone to play the music.

Note: When you plug in the AUX cable, it’ll no function of the Ra-

dio/ Sleep function, volume of the unit can’t be adjusted when 

in AUX function.

USB CHARGING YOUR SMARTPHONE

Plug in the USB cable into the USB Charge Out port, then 

connect the opposite end to your smartphone for changing.   

TROUBLE SHOOTING

If your clock displays irrelevant time or does not function pro-

perly, which may be caused by electro-static discharge or other 

interference, unplug the DC jack to disconnect the AC power 

(and remove the backup battery). The clock radio will be reset to 

default settings and you need to set it again.