PA 358
Technical description Chapter 6
18
PCI bus/device/(slot):
Number of the used PCI bus, slot, and device. If the board is no PCI board, the
message "NO" is displayed.
Interrupt:
Used interrupt of the board. If the board uses no interrupt, the message "Not
available" is displayed.
DMA:
Indicates the selected DMA channel or "Not available" if the board uses no DMA.
More information:
Additional information like the identifier string (eg.: PCI1500-50) or the installed
COM interfaces.
Text boxes:
Under the table you will find 6 text boxes in which you can change the parameters of
the board.
Base address name:
Description of the used base addresses for the board.
Select a name though the pull-down menu. The corresponding address range is
displayed in the field below (Base address).
Base address:
In this box you can select the base addresses of your PC board. The free base
addresses are listed. The used base addresses do not appear in this box.
Interrupt name:
Description of the used IRQ lines for the board.
Select a name though the pull-down menu. The corresponding interrupt line is
displayed in the field below (Interrupt).
Interrupt:
Selection of the interrupt number which the board uses.
DMA name:
When the board supports 2 DMA channels, you can select which DMA channel is to
be changed.
DMA channel:
Selection of the used DMA channel.
Buttons:
Edit
Selection of the highlighted board with the different parameters set in the text boxes.
Click on "Edit" to activate the data or click twice on the selected board.
1 "x": Keyboard shortcuts; e.g. "Alt + e" for Edit