Definition of Application
APCI-1648/APCI-1696
6
1
DEFINITION OF APPLICATION
1.1
Intended use
The boards
APCI-1648
and
APCI-1696
must be inserted in a personal computer
(PC) with
PCI slots which is used as electrical equipment for measurement,
control and laboratory pursuant to the standard DIN EN IEC 61010-1.
The used personal computer (PC) must fulfil the requirements of
DIN EN IEC 62368-1 and DIN EN 55032 or IEC/CISPR 32 and DIN EN 55024
or IEC/CISPR 24.
The use of the boards
APCI-1648
and
APCI-1696
in combination with external
screw terminal panels requires correct installation according to the standard
DIN EN IEC 61439-1 (Low-voltage switchgear and controlgear assemblies).
1.2
Usage restrictions
The boards
APCI-1648
and
APCI-1696
must not be used as safety-related parts
(SRP).
The boards must not be used for safety related functions, for example for
emergency stop functions.
The boards
APCI-1648
and
APCI-1696
must not be used in potentially explosive
atmospheres.
The boards
APCI-1648
and
APCI-1696
must not be used as electrical equipment
according to the Low Voltage Directive 2014/35/EU.
1.3
Limits of use
All safety information and the instructions in the manual must be followed to
ensure proper intended use.
Uses of the board beyond these specifications are considered as improper use.
The manufacturer is not liable for damages resulting from improper use.
The board must remain in its anti-static packaging until it is installed.
Please do not delete the identification numbers of the board or the warranty claim
will be invalid.
