34
Mounting of support legs, toilet seat, support handles and armrests
1.
Install the transverse plate. Tighten the
two countersunk screws with the spanner
provided.
2.
Install the two plastic covers on the
support legs.
3.
Place the frame on/over the toilet.
4.
Install the toilet seat. Use the bushes for
stabilisation on the toilet bowl as necessary.
Rotate the pin bracket to line up with the
hole spacing of the toilet seat. Tighten the
two nuts so that the attachment for the toilet
seat holds the frame firmly on the toilet
bowl. Press the toilet seat firmly into place.
5.
Adjust the feet of the support legs.
6.
Install the two support handle brackets on
the support legs (two alternatives). Tighten
the four screws with the spanner provided.
7.
Install the support handles and adjust the
height (five positions).
8.
Install the armrests and adjust the height
(three positions).
Note.
The locking pin plastic balls sometimes
need to be tightened afterwards.
ATTENTION!
Check which model you have (not all parts come with all models).
2
1
5
4
3
6
7
8
