Addonics Technologies Users Guide v1.0
4-Port SATA II PCI RAID5/JBOD Controller Card
12
10. The PC will reboot.
11. At the
Windows Set-up
screen, press
F6
to specify and add the driver.
12. Insert the Floppy Driver diskette containing the driver from step 1 above.
Press
S
, then press
Enter
.
13. Select
Silicon Image SiI 3124 SATARaid Controller for Windows XP/
Server 2003 or
Silicon Image SiI 3124 SATARaid Controller for Windows 2000,
press Enter.
14. Press
Enter
to continue and follow on-screen instructions to
complete installation.
D. PARITY RAID Set Configuration in RAID BIOS:
1. Power ON your PC.
2. Wait until the system prompts for the RAID BIOS Configuration Utility.
Press CTRL+ S or the F4 key to enter the BIOS RAID Utility.
3. The RAID Utility menu screen will be displayed. Select
Create RAID
set
.
4. Choose
RAID 5.
Press
Enter
.
5. Select how many drives for the raid set. Press
Enter
to select 3.
6. Press
Enter
to automatically create raid set.
7. Press
Enter
to select the Raid size.
8. Are You Sure? Press
Y
.
9. Under the Logical Drive Component, you should see SiI Raid5 Set and
the Drive Capacity.
10. Press CRTL+E to Exit.
11. Are you sure to exit? Press
Y
.
12. The PC will reboot.
13. At the
Windows Set-up
screen, press
F6
to specify and add the driver.
14. Insert the Floppy Driver diskette containing the driver from step 1 above.
Press
S
, then press
Enter
.
15. Select
Silicon Image SiI 3124 SATARaid Controller for Windows XP/
Server 2003 or
Silicon Image SiI 3124 SATARaid Controller for Windows 2000,
press Enter.
16. Press
Enter
to continue and follow on-screen instructions to
complete installation.
