www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
3. Compare HDD
Compare HDD is used to see if the data on a source hard disk is identical to the
target hard disk after the Copy HDD operation.
Choose option 3 and press ENT to begin comparing.
4. Async Compare
Compare HDD is used to see if the data on a source hard disk is identical to the
target hard disk after the Copy HDD operation. While compare process is
on-going, allows you to plug-in additional target drives and comparison will
automatically start for the added target drive.
Choose option 4 and press ENT to begin comparing.
5. PreScan Source
PreScan HDD is used to check if the source hard disk can be accessed properly.
It also tests the read speed.
Choose option 5 and press ENT. The LCD will display prescan information.
6. ReScan BUS
ReScan Bus allows swapping the source or target in and out without having to
reboot the system.
Choose option 6 and press ENT to begin rescanning. The system will rescan the
source without the need to reboot.
7. Source Size
Source Size is used to show the capacity of the source.
Choose option 7 and press ENT. The LCD will display the capacity of the source.
8. Setup
Setup allows various system settings to be changed. There are 12 sub-options:
Language, Copy Size, Startup Menu, Auto Compare, Button Sound, Device Info,
System Info, Fast Copy, Auto Start Drive, Auto Start Timer, Tolerance Size and
Boot Time Delay.
Choose option 8 and the LCD will display the first option of the subfunctions.
